蝴蝶刀的选用钢材～为大家选刀做点好事～

磨刀人

154CM: An American made premium grade stainless steel originally developed for tough industrial applications. Known for its best all-around qualities, it offers great corrosion resistance with good toughness and edge quality.
翻译一下～154cm：美国制造的较高级的钢材～通过一系列的工业制造～被称为在所有性能都有良好表现的钢材～防腐蚀能力极好～硬度和刀锋保持度都不错～

S30V: An American made and developed premium grade stainless steel created especially for knives. It is a powder made steel with a uniform carbide distribution and clean steel properties. As a blade material it offers excellent corrosion resistance and superb edge qualities.

S30V～美国制造～专门为刀具生产的高级不锈钢～炼钢时经过POWDER工序～（大概时加入炭元素的工序）碳化物在钢材中分布均匀～钢材看起来很清晰亮泽～极好的防腐蚀能力～拥有极好的刀锋保持能力～

D2: An air-hardened tool steel, which offers good corrosion resistance and excellent mileage in wear resistance. A good choice for hard use applications.
D2～～～产地不明～没有说～大概是美国把～因为D2的刀都是美国制作的～非常坚硬的工具钢～一般用在工具上～拥有不错的抗腐蚀能力～拥有超级的防磨损能力～（就是很硬）是狂操刀的朋友的最佳选择～

440C: A high-chromium stainless steel with a terrific balance of good hardness and corrosion resistance. 440C takes a nice edge and is fairly easy to resharpen. An excellent value priced steel for its performance.
440C～～大家应该挺熟悉了～美国制作～高铬不锈钢～在硬度和防腐蚀能力上有很好的平衡能力～不错的刀锋保持能力～比较容易打磨～价钱很不错～

N690: An Austrian made stainless steel, which is comparable to 440C in performance and value. Keen edge qualities with great corrosion resistance.
N690～奥地利制造～不锈钢～和440C的功能差不多～不错的刀锋保持能力～很好的防腐蚀能力～

9Cr13CoMoV: A Chinese made high-carbon stainless steel with increased levels of cobalt added for greater edge retention. Offers a higher level of corrosion resistance at a great value.
中国的骄傲～9Cr13CoMoV～中国制造！！高炭不锈钢～加入了适量的钴～可以让钢材有更好的刀锋保持能力～拥有高级的防腐蚀能力～还有～非常非常非常便宜～

AUS-8: A Japanese made medium-carbon, high chromium stainless steel, which offers a good balance of toughness, edge sharpness and corrosion resistance.

AUS 8～小日本的钢材～中炭钢～高铬不锈钢～在硬度～刀锋保持～防腐蚀能力上有很好的平衡能力～

8Cr14MoV: A Chinese steel with similar performance characteristics to AUS-8. An excellent value priced steel for its performance.
又是我们中国制造～和小日本的 AUS 8 基本一样～但是比AUS 8 便宜很多很多～～蝴蝶官网上说是物超所值的钢材～所以一般蝴蝶的红色系列是用这钢做的～价钱也比较便宜～大家支持蝴蝶红色系列啊～～

X15 T.N: This French steel was developed for the aircraft industry for jet ball bearings, as well as the medical industry for scalpels. It has the ability to resist rust in the worst of conditions while maintaining ample edge retention. The capability behind this steel is in the way it is manufactured, resulting in the finest steel for use in harsh environments such as salt water. The edge on an X15 T.N blade is easier to maintain.
X15 T.N：法国制造～飞机用的轴承钢～医院的解剖刀也是用此钢～在最恶劣的情况下可以保持极好的防腐蚀能力而且还保持锋利的刀锋～这钢材的能力主要不是在于材料～而是在于工厂炼钢时的方法～是在恶劣环境下使用表现最好的钢材～比如说泡盐水～割肉啊什么的～刀锋要是用这钢材的话保持能力会很好～

DAMASCUS: A specially forged, layered steel made up of a variety of steels, It offers remarkable toughness and edge quality. For finishing, the surface layers or lines are exposed through an acid etch, which creates a very unique visual effect. Used in special applications due to its inherent high cost and artistic nature.
大麻～～大家都快熟悉到烂～产地不明～（大马士革村？）用特殊的工艺煅打制作～使用不同性质不同用度的钢层叠煅打而成～有很好的硬度和柔韧度～在刀锋完成时要通过一段酸洗的工艺使其上面的花纹明显化～有顶极的视觉观赏价值～也是收藏的好东西～不是什么可以拿来用的刀～确实可以传世的收藏品～刀锋保持也很好～防腐蚀嘛～～看你怎么保养啦～

终于完成了～英语来自蝴蝶官方网站～本人亲自翻译～绝对原创～

磨刀人

呼～终于完成了～呈上微量元素对比表给大家参详一下～

磨刀人

所有编号的意思～首先～蝴蝶共有～金～黑～蓝～红～四大系列～价钱从金到红～看盒子就知道是什么系列了～（盒子金色就是金～蓝色就是蓝系列）
(NO CODE): Plain edge/no blade coating
什么也没有的～普通刀锋～没有涂层～

S: ComboEdge™ (partially serrated)/no blade coating
有部分锯齿～没有涂层

BK: Plain edge/BK1® black corrosion resistant coated blade
普通刀锋～有防腐蚀涂层～

SBK: ComboEdge (partially serrated)/ BK1® black corrosion resistant coated blade
有部分锯齿～有涂层

B: Black anti-reflective, corrosion resistant coated blade (Red Class)
黑色涂层～（红色系列的）

SB: ComboEdge (partially serrated)/ black anti-reflective coated blade (Red Class)
有部分锯齿～有黑色涂层～（红系列）

OD: Olive Drab color handle
橄榄绿和土黄色的刀柄～

SL: Skyline Camouflage™ patterned handle
迷彩伪装刀柄～

SN: Sand Camouflage color handle
沙漠伪装刀柄～

CF: Carbon Fiber Handle
炭纤维刀柄

-RED: Red color handle
红色的刀柄

SLV: Silver color handle
银色刀柄

-BLU: Blue color handle
蓝色刀柄

-YEL: Yellow color handle
黄色刀柄

-BLK: Black color handle
黑色刀柄

P: Mother-of-Pearl
珍珠刀柄

A: Abolone
鲍鱼～（贝壳吧）刀柄

BT: BT2® black corrosion resistant coated blade
黑色涂层刀刃

BP: BP1 Charcol color, scratch resistant coating
黑炭色（亚光吧）防划损涂层

-TK: Tether Kydex® friction-fit sheath
TK防滑刀鞘

W: Soft sheath for rescue hook
钩子刀的软鞘～

ADC: Army Digital Camouflage color sheath
军用数码型迷彩刀鞘

T: Trainer blade with red handle
训练用无刃红色手柄的刀

TR: Bali-song trainer with red handle
不知什么意思的红柄训练无刃刀

D2: D2 Blade Steel
D2钢材制造的刀片

H2O: X15 T.N steel, 100% corrosion resistant
X15 T。N制造的防腐蚀刀片

DM: Damascus Blade
大马士革的刀片

CP: Clam pack
这个真的不知道了～可能是贝壳做的包装吧～

磨刀人

你最喜欢哪种钢材呢～我是D2和154CM～当然还要支持国产～蜘蛛的中国产钢材刀BYRD系列小鸟才十多美金一把～刚又进了一把～还有这154Cm的蝴蝶～大家觉得怎么样呢？

小蜘蛛～才十多美金～整个系列都是～是爱好蜘蛛者的首选～




还有蝴蝶的～也是很喜欢～特别是钢材～黑系列的～

[ 本帖最后由 磨刀人 于 2007-2-17 17:57 编辑 ]

磨刀人

对了～蝴蝶的话～金色系列是收藏等级的～黑色是战术等级的～蓝色是高品质等级的～红色是价廉物美等级的～

鲁迅

THANKS BOY~~顶你。

磨刀人

哈哈～谢谢～黑色版的我也很喜欢～当初自我争斗了很久～最后还是选了本色钢版的～这刀我太喜欢了～

jasonp

X15TN是抗锈能力和H-1有一拼的钢材，非常，非常，非常的耐锈，只比H-1差一点点，因为X15TN在海水里放久了表面会有污垢，但是很轻松就擦掉了

蝴蝶在转用X15TN之前是用H-1的，弄得蜘蛛老板很沮丧，因为被蝴蝶抢先了，后来蝴蝶转用X15TN,蜘蛛开始大量使用H-1

lukehhj

认真学习了，好帖！！

饭太热

我晕,,,拯救我吧,,,最爱还是蝴蝶!!!!
蝴蝶5几几,最大有多大的?
昨天在百盛看的， 好大,我手里的那把感觉好小,请磨刀人儿或者鲁迅儿(儿是后缀,儿化音,不是其他意思)来帮助~