我的这个小沙锁定也太深了吧。

lixuwei003

我的这个小沙锁定也太深了吧。2013年的刀，还很新。推开一般这样，


甩开就图上的样子，

万智牌水真

赶紧出了吧，买个其他的小刀，zt不错  这玩意趁着有人追 赶紧卖了。

9860821zz

是太深了,快到头了, 二手区等

devilphenix

锁定深点怎么了？深点用着不是更放心吗？之前也有人觉得锁定太浅了，万一解锁了怎么办呢。这个不用纠结吧。再说对于这种止刀柱结构的，不建议甩开，太伤刀了。

ggxuxiang

确实有点深，，，，我的13年的大沙也深，但是没有这么深

万智牌水真

万智牌水真 发表于 2014-4-30 10:50
赶紧出了吧，买个其他的小刀，zt不错  这玩意趁着有人追 赶紧卖了。

黄昏兄 我真是实话，首先xx品牌目前比小沙贵，毕竟一分钱一分货，zt确实很好 我有2把zt很喜欢，比这个cr确实强。

doggi-style

CRK工厂的指标是75%

老外总结官方关于锁定的各种回复。信不着就不要买了，去买熊头好了{:5_173:}

I was wondering if any Sebenzas have been returned for blade play due to wear between the area of the blade tang and the surface of the liner that makes contactn with the blade? If so, would it be possible to purchase a lock side scale from you?

This is not something we have experienced because of "wear" - it can happen for some other reasons - after market modifications or screws not being tight or dirt in the lock or similar things.
We would not send out a lock side scale (or blade or other knife parts!) - we would ask that the knife be returned to us so that we can put right whatever it is that is not correct.(There may well be a charge for the repair, however and we would be in touch with the customer about it.) Part of what you get when you buy a Chris Reeve Knife is "service". It is important to us that the knives work the way they were intended and we will gladly work on any knife that needs it.

- Anne Reeve, 10/09/98

Just to clarify a point here, the pivot pin on the Sebenza is not asymetrical and is also not the part that you are thinking of in terms of rotation! The stop sleeve, against which the blade rests when the knife is open, can be rotated it necessary to get just a tiny bit of take-up.
If you go to our website at www.chrisreeve.com you will see detailed diagrams showing the relationship between the blade and pivot, the stop sleeve and the lock.

Lateral movement in the blade is not acceptable in a Sebenza. If there is play, there is something wrong and the best thing to do would be to send it to us so we can put it right.

- Chris and Anne Reeve, 10/09/98



My problem is that the lock travels and hits the opposing liner when a firm grip is applied. I disassembled it and cleaned it thoroughly but the problem persists.

There is nothing to fix!! The lock will move over toward the back of the front handle slab if you press hard on it. After all, it is a spring that has a natural position and can move further if pushed. The spec position for the lock is to cover 75% of the blade. If it falls naturally further than that, we will adjust it.
A difference between the Sebenza and other liner locks is that you can get in behind the lock of a Sebenza and push it over. With the others, you can only push from the top of the liner which is a less effective movement.

We know that a lot of owners of Sebenzas like to adjust the lock and the pivot etc. but we DO discourage this. When we ship the knives, they work the way they are intended and modifications usually end up with something not working right!

- Anne Reeve, 11/03/98

devilphenix

万智牌水真 发表于 2014-4-30 11:29
黄昏兄 我真是实话，首先xx品牌目前比小沙贵，毕竟一分钱一分货，zt确实很好 我有2把zt很喜欢，比这个cr ...

ZT比CR强？果然有想法，这个我倒是第一次听说。

CR甩不开？我想你肯定不知道楼主怎么甩开的。或者说我说了你也不信，那我还是不说了。

devilphenix

万智牌水真 发表于 2014-4-30 11:29
黄昏兄 我真是实话，首先xx品牌目前比小沙贵，毕竟一分钱一分货，zt确实很好 我有2把zt很喜欢，比这个cr ...

顺便都问一句，老兄对比过CR和ZT吗？

xiaochonglou

新刀的话算比较深了

lixuwei003

devilphenix 发表于 2014-4-30 12:00
ZT比CR强？果然有想法，这个我倒是第一次听说。

CR甩不开？我想你肯定不知道楼主怎么甩开的。或者说我 ...

推开一半在甩开的，

devilphenix

lixuwei003 发表于 2014-4-30 12:34
推开一半在甩开的，

这个我当然知道了。我是说楼上那个老兄他不是质疑CR不能甩开的吗？我玩儿CR也是这么干的。U莎我习惯是用大拇指压一下破窗锥那个位置，稍微弹开一点然后甩开的。

devilphenix

不过一般玩儿的话不需要甩开的，你这个锁定推开的话使用安全系数很高了。你肯定没试过推开后把锁片用手向下按一下，我试过，按一下锁定会更深的。

当然了，你要是很介意的话，要么出掉，要么自己调整下。帮你找了一个攻略，不过是赏玩论坛的C版写的精华帖子，你自己看看先。http://218.246.69.29/viewthread. ... 8%B6%A8%B2%B9%B3%A5
哦，这个坛子里也有 http://www.knifriend.com/forum.p ... 8%B6%A8%B2%B9%B3%A5

或者你搜索锁定补偿也可以的。



其实说真心话，要是我的话，我就这么用了，就好像这几天讨论的风风火火的那个ZT螺丝拧滑丝的问题一样，对于实操党来讲，这都不是个事儿{:5_181:}

lixuwei003

devilphenix 发表于 2014-4-30 12:46
不过一般玩儿的话不需要甩开的，你这个锁定推开的话使用安全系数很高了。你肯定没试过推开后把锁片用手向下 ...

多甩开就 按不动了

米克KILLER

CR是中高端刀具，ZT 是中低端刀具，两个厂家市场基本没有交集，ZT 主要竞争对手是蝴蝶蜘蛛等厂家，他们共同特点都是多型号大批量出货。ZT主营战术刀具，和CR 没有任何可比性。另外CR 锁定出厂就是百分之50到75之间，这是厂家设计的并不是质量问题，沙锁定都是面接触，磨损比点接触线接触慢很多，正常使用不可能把锁定用到头，放心吧。

肖

锁定真安全

djp13

虽说锁定深安全，但总觉着不舒服。我把大沙拆了再组装，发现锁定由70%左右变成50%多，推开一半后甩开，锁定也没变。止刀柱转转再装或许有用。楼主尝试一下吧。

西冷5分

万智牌水真 发表于 2014-4-30 10:50
赶紧出了吧，买个其他的小刀，zt不错  这玩意趁着有人追 赶紧卖了。

专注黑沙30年{:5_147:}

devilphenix

西冷5分 发表于 2014-4-30 14:44
专注黑沙30年

最近来坛子里少，刚才看到另一个投票的帖子才发现这人果然是专注黑沙30年啊。

jiaoo5323

devilphenix 发表于 2014-4-30 15:09
最近来坛子里少，刚才看到另一个投票的帖子才发现这人果然是专注黑沙30年啊。

黑就黑呗，咱这又没人是沙的代理商，能把沙的价格黑下去一半我双手双脚赞成{:5_186:}