保加利亚刀匠用M390钢材+碳纤维柄材制造刀具

秋无伤 · 发表于 2013-8-13 11:49

视频地址：http://v.youku.com/v_show/id_XNTk1MTExMDQ0.html
可惜不能直接发视频，大伙儿挪步去优酷看吧。

保加利亚刀匠用M390钢材+碳纤维柄材制造刀具

以下文字系转载：
This video is made in the workshop of Bulgarian knife maker Stoil Manchev - well known here in Bulgaria like "Silverman".

During the two days project I spent more than 10 hours with the knife maker and I filmed parts of his work on this beautiful knife - "Model 1" in Carbon Fiber and M390 Steel.

The knife is special Carbon Fiber edition to the basic "Model 1" in M390 or K110 steel with green micarta.

Overall length - 20.5 cm
Blade length - 10.5 cm
Blade thickness - 4.5 mm

The M390 steel blade is heat treated to 62 Hrc with cryo treatment.

M390 composition:
Carbon 1.90%
Chromium 20.00%
Vanadium 4.00%
Molybdenum 1.00%
Silicon .70%
Tungsten .60%
Manganese .30%

The hollow grind was made on a 20 inch wheel - during the video you will see the thickness of the blade behind the cutting edge.

The abrasive belts for grinding and finishing the blade are:
- ceramic - 36 grit
- cubitron-II 60 grit
- ceramic - 120 grit
- trizact gator - A65
- scotch brite - medium

Final sharpening on diamond rotation wheels.

The knife is skeletonized full tang with SS corby bolts and SS lanyard tube.

The prices starts from 150$ to 350$ (depending the steel choice and handle material + leather sheath) with free shipping to EU or USA

You can reach the knife maker on - stoilmanchev@abv.bg

sjsj · 发表于 2013-8-13 15:34

为何生存刀都是那个鸟样?中用不中看

zhouming007 · 发表于 2013-8-13 15:55

生存刀要简单明了，维护起来方便，开刃也是，简单的形状磨起来方便

431600307 · 发表于 2013-8-13 19:07

M390钢材不错

rhz2000 · 发表于 2013-8-13 20:34

谢谢分享，不错

glacier · 发表于 2014-3-17 03:45

好似没有热处理

T-9000 · 发表于 2014-3-18 12:46

貌似难度没什么吧.....很多刀子不止是停留在材料，户外刀，M390，3V,加个G10，米卡塔，沙铁柄，其实配置都足够了，但是做的好和不好还是差了老远

柳州星光 · 发表于 2014-3-18 20:22

很好的教程，原来在清根的时候，刀上装个夹具，可以帮助定位的，学习了。

[其他] 保加利亚刀匠用M390钢材+碳纤维柄材制造刀具

相关帖子