百禄M390钢材Peter热处理Survive Knives GSO 4.1生存刀测试

秋无伤

视频地址：http://v.youku.com/v_show/id_XNTk1MTA1NTI0.html
可惜不能直接发视频，大伙儿挪步去优酷看吧。

百禄M390钢材Peter热处理Survive Knives GSO 4.1生存刀测试

以下文字系转载：
Today, for those wondering about it's toughness, we do some abusive testing of the SURVIVE! GSO-4.1 in Bohler M-390, the current stainless offering for SURVIVE! knives. Bohler M-390 is a premium martensitic stainless grade of knife steel, made using the particle metallurgy process. Consider Bohler M-390 for very high wear resistance (edge holding) and excellent corrosion resistance.While no stainless grade has anywhere near the toughness of my CPM-3V high alloy tool steel offerings, being made with a particle metallurgy process, it is still certainly more than capable of tackling even the toughest cutting tasks with confidence.We proudly work with Peter's Heat Treating of Meadville PA for all of our heat treating needs. SURVIVE! Own the Advantage.www.SurviveKnives.comUPDATE: The SURVIVE! Warranty.All SURVIVE! knives are warranted for life against defects in materials and workmanship. Additionally, if your knife should ever suffer significant unintentional damage, we will replace it with a comparable model for only the cost of shipping and handling.SURVIVE! knives are designed for use as a cutting tool, built using premium materials, to provide many years of reliable service. Use of a SURVIVE! knife for any purpose other than cutting is considered abuse, which is not covered by our lifetime warranty. SURVIVE! knives, like any tool, can eventually wear out. Keep your SURVIVE! knife well maintained for best performance and optimum service life. Blade coatings and factory sheath systems are not covered by our lifetime warranty.Knives damaged due to abuse/neglect will be handled on an individual basis and will be repaired or replaced, at our discretion, for a reasonable rate. Please contact WorkShop@SurviveKnives.com for all warranty, service or repair inquiries.

文明

这钢材的刀必须来一把。

尖端技术

今天，为了了解它的性能，我们做一些测试，百禄M-390，不锈钢求生刀。以百禄M-390为材质的SURVIVE GSO-4.1是优质的不锈钢刀，使用颗粒冶金。虽然韧性不如CPM-3V高合金工具钢，但它的粒子冶炼过程使它具有极高的耐磨性和优异的耐腐蚀性，能够解决即使在最恶劣环境的切割任务。
只翻译出这些，后面像是一些售后方面的内容，我水平有限

431600307

M390顶起

闪烁猪

牛逼啊！不愧是超级钢，不知道几年之后被什么变态钢超越啊

T-9000

M390出现在户外小直中，完全符合我之前钢材测试后的总结和预测，希望以后能够多接触一些M390的户外直刀，自己也在找群内技术宅帮忙加工中。

孙小胖

我的M390版  Survive Knives GSO 4.1   估计后天就能到手了

这家貌似之前没怎么见过, KA BHQ也仅仅有M390版得Survive Knives GSO 4.1卖,  不过很快就断货了

孙小胖

同时还进了一只 S90V的Survive Knives GSO 4.1     不知道两只比较起来如何

BG-42

M390,跟CTS-204P相比呢

孙小胖

俩成分含量一模一样  M390   CTS-204P

T-9000

孙小胖 发表于 2013-8-13 21:57
同时还进了一只 S90V的Survive Knives GSO 4.1     不知道两只比较起来如何

拿S90V做这个刀子，基本是属于找死，如果暴力使用的话，崩口程度不可想象

yyyywx

九千大人 最有发言权啊，请教九千桑最中意什么钢材啊

克克

surviveknives官网上GSO4.1的刃材选择只剩下S90V和3V的了，难道M390的不产了？

nokiacbc

这刚牛逼了

孙小胖

克克 发表于 2013-8-14 01:27
surviveknives官网上GSO4.1的刃材选择只剩下S90V和3V的了，难道M390的不产了？

这个网站M390版得4.1  貌似是限量版的, 印象中是200只吧, 就几个网站分了点货, 很快就售罄了

sas1941

楼主是牛人··············

T-9000

yyyywx 发表于 2013-8-14 01:14
九千大人 最有发言权啊，请教九千桑最中意什么钢材啊

这个之前就总结过，M390出现在小直上也被我预料中。

FICO139

哈哈  自己搞了块M390做了把小直，真有那么强悍？
我用柄尾桥路面的大理石板，狠砸了几下都没砸裂，柄尾轻微变形

yyyywx

T-9000 发表于 2013-8-14 11:55
这个之前就总结过，M390出现在小直上也被我预料中。

cts-204p就只能找到c156而且还必须去海淘 悲剧的是搞不懂，每次都是买JS高价哎 只有等谁开团了

yuyuppy

但是太贵了，户外小刀还是要好磨，随便找块石头蹭几下就锋利的，要便宜随便买买的，要易获得。