BOS

wangqi8730

学习了，不过我个人觉得BOS的热处理还是不错滴

realjam

142# wangqi8730



图片都来自网络，无商业目的引用

realjam

OUR HEAT TREATING SPECIFICATIONS

Materials Heat Treated: All stainless steels, air hardening tool steels,stainless steel Damascus.Blades are hardened in an inert atmosphere, cryogenic quenched to-280 degrees F and double tempered (triple tempering is available atextra charge). Tool steels are snap tempered at 375 degrees F beforecryogenic cooling. All blades are checked for straightness and 100%Rockwell tested. Maximum length for all materials is 32 inches

白鸟已隐

BOS之于刀具，有点iso之于企业的意思了。BUCK容留BOS,并不是因为热处理他们没了他做不好，而是在昭示，我BUCK的热处理可与行业的最高标准划等号，做标准的企业要比做品牌的来的高级，BUCK是老大。反之，BOS的今天也全靠BUCK和ST的成全，大树底下好乘凉，哪颗树大，BOS看得透。他明白，什么时候ST的废钢板才能像buck的拼装原料一样大厢出口到中国呢？有生之年是不会了

StoneX

OUR HEAT TREATING SPECIFICATIONS

Materials Heat Treated: All stainless steels, air hardening tool steels,stainless steel Damascus.Blades are hardened in an inert atmosphere, cryogenic quenched to-2 ...
realjam 发表于 2009-11-10 13:27

很重要的信息：所有的不锈钢、风硬工具钢和不锈钢大马默认的规程是两次低温回火；也可以做三次低温回火不过要加钱。 想当年Busse 用INFI之前用的就是三次回火的A2钢。

mjh2

此贴{:3_55:}很有用啊